Gira 5425 00 Manuel D'utilisation page 10

Actionneur à commutation/impulsion radio double Mini
Activate wind alarm switching
state
Deactivate wind alarm swit-
ching state
Priority, sun protection
Activate sun protection swit-
ching state
Deactivate sun protection swit-
ching state
Priority, twilight
Activate twilight switching
state
Deactivate twilight switching
state
Switch off brightness over-
shoot
Switch on brightness under-
shoot
32579122 10864972
On, Off
Basic setting: Off
On, Off
Basic setting: Off
0...4
Basic setting: 0
On, Off
Basic setting: On
On, Off
Basic setting: Off
0...4
Basic setting: 0
On, Off
Basic setting: On
On, Off
Basic setting: Off
On, Off
Basic setting: On
On, Off
Basic setting: Off
24.03.2017
Defines the behaviour of the
output on activating the wind
alarm.
Defines the behaviour of the
output on deactivating the
wind alarm. Only visible when
the priority for the wind alarm
is 0.
Specifies the priority for recal-
ling and removing a scene of
type Sun protection for the
channel.
Defines the behaviour of the
output on deactivating the sun
protection. Only visible when
the priority for the sun protec-
tion is 0.
Defines the behaviour of the
output on deactivating the sun
protection. Only visible when
the priority for the sun protec-
tion is 0.
Specifies the priority for recal-
ling and removing a scene of
type Twilight for the channel.
Defines the behaviour of the
output on activating the twi-
light function.
Defines the behaviour of the
output on deactivating the twi-
light function. Only visible
when the priority for the twi-
light function is 0.
Allows automatic switch-off
according to the brightness. If
the parameter is On, then the
light controller switches off au-
tomatically when the bright-
ness setpoint is greatly excee-
ded. This parameter is not yet
active, as a light controller has
not yet been implemented.
Allows automatic switch-on
according to the brightness. If
the parameter is On, then the
light controller switches on au-
tomatically when the bright-
ness setpoint is greatly under-
shot. We recommend only
using the parameter in
connection with the parameter
"Switch-off on brightness over-
shoot". This parameter is not
yet active, as a light controller
has not yet been implemen-
ted.
10/12