Notes On Safety; Removing The Battery - Goobay 68856 Mode D'emploi

4 Notes on Safety:

ATTENTION! Only skilled electricians may assemble and disassemble the
housing of the product. There is a risk of electric shock and short circuit!
• Your product is not a toy and is not meant for children, because it contains small parts
which can be swallowed and injured when used inappropriately!
• Install and store the product and its accessories in a way persons cannot be
injured, or objects not be damaged for example by dropping or stumbling.
• Remove or store the packing materials well, because children may cut themsel-
ves on them while playing. Furthermore, there is a risk of swallowing and inhaling of
incidentals and insulating material.
• Also read the User Manual of your devices, to be tested, for checking the compatibility
and fitting of the connectors to the product and the other way round.
• A defective device may not be put into operation, but must be disconnected from mains
and protected against further use. Repairing, such as assembling and disassembling
the housing is only allowed to skilled professionals. By repairing it yourself you will
lose all warranties and there is a risk of electric shock and short circuit.
• Drive the product only with 9 V DC battery block.
• Avoid places with high temperatures, humidity, or places which might come into contact
with water.
• Do not place things on the device.
• Mind and follow the terms of law and health care for using the device in industry.
• Never expose the product to high mechanical pressure.
• Do not modify or change the product or its accessories! Also mind chapter "warranty
and liability".
• Connect all cables softly and slowly to the product to avoid damages.
• Do not use damaged parts.
• The device may only be installed and used in dry interior rooms.
• Never use the device with live cables!
• Remove the battery from the device, when it is not used for longer time.

5 Removing the Battery:

1. Put off the battery case by sliding it towards the arrow.
2. Connect a 9 V battery block (6LR61) to the connection cable. A battery is not included.
3. Close the battery case. Mind not pinching the cable during closing the battery case for
correct function.
9