Chamberlain 953EV Guide Rapide

For use with Chamberlain 315 MHz or 390 MHz garage door openers manufactured after January 1, 1993.
The remote control can be programmed to operate up to three compatible devices, such as garage door
openers and gate operators.
Before you start:
Make sure the garage door opener has a working light because it is a programming indicator.
WARNING: This product can expose you to chemicals including lead, which are known to the State
of California to cause cancer or birth defects or other reproductive harm. For more information go
to www.P65Warnings.ca.gov.
GARAGE ACCESS SYSTEM
REMOTE
MODELS 953EV, 953EV-P2,
953EVC AND 953EVC-P2
PREPARE
CONNECT TO THE MYQ ® APP
1
Look for a Wi-Fi or a Powered by myQ
compatible. If not, proceed to programming.
2
To start monitoring the garage door movements, scan the QR code
to download the myQ ® app.
® ®
GARAGE ACCESS SYSTEM
KEYCHAIN REMOTE
MODELS 956EV, 956EV-P2,
956EVC AND 956EVC-P2
LED
Locate the LEARN button on
the garage door opener.
NOTE: Your garage door
opener may look different.
OR
Learn
LED
Learn LED
Green LED or
Purple LEARN
Red/Orange
button
LEARN button
®
logo to determine if your garage door opener is myQ
http://www.chamberlain.com/CatalogResourcesV3/en-us/shared/files/tucmanuals/114A5043SP.pdf
3-BUTTON KEYCHAIN REMOTE CONTROL
MODELS
953EV, 953EV-P2, 935EVC, 953EVC-P2, 956EV,
956EV-P2, 956EVC, AND 956EVC-P2
LED
OR
Learn
LED
Yellow LEARN
button
®
3
To add your remote and name, follow the in-app instructions in
order.
4 After completing setup in the app, you can control the garage door
opener and receive notices every time your garage door opens
and closes.
To prevent possible SERIOUS INJURY or
DEATH from a moving gate or garage door:
• ALWAYS keep remote controls out of reach
of children. NEVER permit children to
operate or play with remote controls.
• Activate gate or door ONLY when it can be
seen clearly, is properly adjusted and there
are no obstructions to door travel.
• ALWAYS keep gate or garage door in sight
until completely closed. NEVER permit
anyone to cross path of moving gate or
door.
Locate the Program button on the
remote control.
Program Button
935EV,
953EV-P2,
953EVC, AND
953EVC-P2
956EV,
956EV-P2,
956EVC AND
956EVC-P2
Program Button
OR
John opened the garage
door at 4:32 p.m.
Para Manual en Español ir a: