Publicité
Les langues disponibles
Les langues disponibles
34. Ball Joint
10. Canopy
Hang the ball joint and the fan onto the
bracket. Make sure the guide pin of
bracket is fitted into slot of ball joint.
9. Male/Female Connectors
Assemble the fan blade between the
blade bracket and blade holder, then
tighten the screws together with flat
washer.
Mount the mounting plate onto outlet
box by the 2 srews, spring washers and
flat washers.(Using explosion screws(not
provided) for concrete).
Insert the remote control receiver into
the space between the spherical
connection and mounting plate, then
fix the sensor on the ceiling.(see the
above figure).
Cable connection
.
36. Mounting
plate
8. Remote
Control Receiver
2. Terminal Block
THE INSTALLSTION
POSITION OF SENSOR
Page3
Publicité
