Menu Select Dvi/Vga; Menu Exit - Optelec TwinView Manuel D'utilisation

Optelec

5.4.8 Menu Select DVI/VGA

Select the DVI or VGA port of the selected channel to which a ClearView+ (or other video
magnifier) or PC has been connected. By default, the VGA port is selected. To select a
port:
- Select channel A or B by pressing the channel A or channel B button;
- Activate the menu by pressing the menu button;
- Select Select DVI/VGA by using the up and down cursor keys and activate the
option by pressing the A/B button;
- Select DVI or VGA from the submenu by using the up and down cursor keys and
activate the chosen option by pressing the A/B button;
- Use the menu Exit or press the Menu button to leave this submenu.

5.4.9 Menu Exit

Activating this menu item will exit the menu.
TwinView
Page 18