Inputs & Controls - ADVANCED NATIVE TECHNOLOGIES BBM Série Notice D'emploi

3 | DESCRIPTION
3
2
1
BBM Series
4 User manual |
5
6
3.1 | INPUTS & CONTROLS
1 CH1 - MIC/LINE INPUT
Balanced microphone (XLR-F) and line (6,35 mm-1/4" jack) input. The
BBM3 model features the 6.35 mm-1/4" jack connector only. You may
also use a microphone cable with unbalanced 6.35mm jack.
2 CH1 - LINE/MIC SWITCH
Place the switch in LINE to use a line-level source or MIC for use with
a microphone
7 3 CH1 - LEVEL
This knob adjusts channel one level, turn it to the right to raise the level,
to the left to decrease it.
8
4 CH2 - LINE INPUT
Input with RCA sockets and 3,5mm mini-jack. The BBM3 model features
the mini-jack connector only.
5 CH2 - LEVEL
This knob adjusts channel two level, turn it to the right to raise the level,
4
to the left to decrease it.
6 MIX OUT
This 6,35 mm-1/4" jack output provides a balanced line-level signal,
useful for connection to another active speaker.
7 LED SIG/CLIP
The CLIP indicator turns on when the speaker signal is distorted. In this
case reduce the active channel(s) level(s).
8 LED ON
The ON indicator is lit when the unit is plugged to mains, and the power
switch is ON.
BBM Series
5
| User manual