Bestron AAC7000 Mode D'emploi page 40

Masquer les pouces Voir aussi pour AAC7000:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 15
Any person who is involved with working on or breaking into a
refrigerant circuit should hold a current valid certificate from an
industry-accredited assessment authority, which authorizes their
competence to handle refrigerants safely in accordance with an
industry recognized assessment specification.
Servicing shall only be performed as recommended by the
equipment manufacturer.
Maintenance and repair requiring the assistance of other skilled
personnel shall be carried out under the supervision of the person
competent in the use of flammable refrigerants.
All working procedure that affects safety means shall only be
carried by competent persons.
WHAT YOU SHOULD KNOW ABOUT THIS APPLIANCE
Notes:
The air conditioning is only suitable for indoor use and is not
suitable for other applications.
Follow local grid interconnection rules while installing the air
conditioning and ensure that it is properly grounded. If you have
any question on electrical installation, follow the instructions of the
manufacturer, and if necessary, ask a professional electrician to
install it.
Place the machine in a flat and dry place and
keep a distance of above 50cm between the
machine and the surrounding objects or walls.
After the air conditioning is installed, ensure
that the power plug is intact and firmly plugged
into the power outlet, and place the power cord
orderly to prevent someone from being tripped
or pulling out the plug.
Do not put any object into the air inlet and
outlet of the air conditioning. Keep the air inlet
and outlet free from obstructions.
When drainage pipes are installed, ensure that
the drainage pipes are properly connected,
and are not distorted or bended.
While adjusting the upper and lower wind-
guide strips of the air outlet, pluck it with hands
gently to avoid damaging wind-guide strips.
When moving the machine, make sure that it is in an upright
position.
The machine should stay away from gasoline, flammable gas,
stoves and other heat sources.
40
Caution, risk of fire!
R290
EN

Publicité

Table des Matières
loading

Table des Matières