•
Press gently so that the whole blade is in close contact
with the skin and the surface of the blade does not move
up and down.
Wet/foam shaving
Shaving with soap/lather makes the skin slippery for a closer
shave.
1
1
Attach the shaver head [F].
2
2
Remove the bikini comb [E].
3
3
Check that the outer foil is not deformed or
damaged.
4
4
Wet your skin and put soap/lather on your skin.
•
Do not use shaving cream, skin cream or skin lotion as it
will clog the blades.
5
5
Press the OFF/ON switch [G] to turn on the
power.
Cleaning
Always clean the frame, gentle/beginner caps and discs after
use to keep them in a hygienic state.
Switch off and unplug the appliance before cleaning.
Dry cleaning
1. Lift the frame, gentle/
beginner caps upward
while holding the cap
release rib [BC3] or
remove the frame by
pushing the frame release
button [F8].
2. Clean the epilation head [D]
and the shaver head [F] with
the cleaning brush [I].
Wet cleaning
1. Lift the frame, gentle/beginner caps upward while holding
the cap release rib [BC3] or remove the frame by
pushing the frame release button [F8].
2. Apply liquid hand soap
to the discs and the
blades.
3. Turn the switch on and
then wet the discs and
the blades to create
foam.
1
2
2-4
9