Disposal: Information For Users; Important Warnings; Declaration Of Conformity - Carel Heosbox Mode D'emploi

ENG

DISPOSAL: INFORMATION FOR USERS

Fig. 1
PLEASE READ AND KEEP
With reference to European Union directive 2012/19/EU issued on 4 July
2012 and related national legislation, please note that:
1. Waste Electrical and Electronic Equipment (WEEE) cannot be disposed
of as municipal waste but must be collected separately so as to allow
subsequent recycling, treatment or disposal, as required by law;
2. users are required to take Electrical and Electronic Equipment (EEE)
at end-of-life, complete with all essential components, to the WEEE
collection centres identified by local authorities. The directive also
provides for the possibility to return the equipment to the distributor
or retailer at end-of-life if purchasing equivalent new equipment, on
a one-to-one basis, or one-to-zero for equipment less than 25 cm on
their longest side;
3. this equipment may contain hazardous substances: improper use or
incorrect disposal of such may have negative effects on human health
and on the environment;
4. the symbol (crossed-out wheeled bin – Fig.1) even if, shown on the
product or on the packaging, indicates that the equipment must be
disposed of separately at end-of-life;
5. if at end-of-life the EEE contains a battery (Fig. 2), this must be
removed following the instructions provided in the user manual
before disposing of the equipment. Used batteries must be taken to
appropriate waste collection centres as required by local regulations;
6. in the event of illegal disposal of electrical and electronic waste, the
penalties are specified by local waste disposal legislation.
READ CAREFULLY IN THE TEXT!
Separate as much as possible the probe and digital input cables from
cables to inductive loads and power cables, so as to avoid possible
electromagnetic disturbance. Never run power cables (including the
electrical panel cables) and signal cables in the same conduits.
Heos BOX - NAM version +0300097EF - rel. 1.0 - 17.06.2021
Fig.2
NO POWER
& SIGNAL
CABLES
TOGETHER

IMPORTANT WARNINGS

This product is to be integrated and/or incorporated into the final
apparatus or equipment. Verification of conformity to the laws and
technical standards in force in the country where the final apparatus or
equipment will be operated is the manufacturer's responsibility. Before
delivering the product, Carel has already completed the checks and
tests required by the relevant European directives and harmonized
standards, using a typical test setup, which however cannot be
considered as representing all possible conditions of the final
installation.

DECLARATION OF CONFORMITY

The CAREL Heos box is in compliance with current regulation:
UL 1995/2015
WARRANTY ON MATERIALS
See the document "Warranty terms and conditions", which should be kept
carefully together with this manual and all other technical documentation
delivered with the Heosbox unit.
APPROVAL
The quality and safety of CAREL Industries S.p.A. HQ products are
guaranteed by the ISO 9001 certified design and production system.
6