Operation Of The Leds - Adeunis RF sigfox TEMP Guide Utilisateur

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

sigfox TEMP- Guide utilisateur / User guide version V1.2.0

2.3. Operation of the LEDs

Mode
Transmission of frame (test mode only)
Product in Park mode
Magnet detection process (1 to 6 seconds)
Product start (after detection of the magnet) Off
Switching to the Command mode
Battery level low
Product faulty (return to factory)
EN
Product in production mode
LED red state
Off
Off
Continuously lit
Flashing (1s ON by 30S)
Fixed
50ms on / 30 s off
LED green state
Flash at the beginning of the transmission
cycle
Off
ON from detection of the magnet up to a
maximum of 1 second
Rapid flashing 6 cycles, 100 ms on / 100
ms Off
Continuously lit
50ms on / 30 s off (just after the red LED)
Page
52
of 72

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Arf8181ba

Table des Matières