Kimex 049-3 W Série Manuel De Montage page 20

Screen installation
2. Now lift the crankcase with two people and insert it carefully in the
brackets. Make sure that the profiles of the box engage in the hooking arms
of the brackets. Now let the crankcase slide slowly down and only let go
when the crankcase is actually held by the bracket.
1. Hold the crankcase in
front of the brackets and
push it from below with
the top edge against the
head of the bracket so
that the end of the
bracket is in the groove in
the housing.
Ceiling mount - Option 2
WARNING ! Be sure to use a supporting structure.
1. Please use the plastic anchors to mounting on
a solid stone ceiling or concrete. Determine the
position of the brackets assembly according to
the dimensions of the housing and the height of
the canvas. Draw a line right to install the two
brackets in the same alignment. Attach the rings
to the upper part of the support. Use the ring as a
template and mark the holes corner with a
pencil. Drill the holes according to the markings
with a 6mm drill, insert the dowels into the holes and insert M6 hooks. Then
hang the canvas with the rings on the hooks.
2. Slide the crankcase
towards the wall until it is
visibly resting on the
brackets.
5
3. Once the crankcase is
securely fastened to the
brackets, tighten the
lower security screw
clockwise. The bracket
closes, tightens and the
crankase moves up a bit.