iCES IBT-6 Mode D'emploi page 9

commercial use. Household use only.
The normal function of the product may be disturbed by strong Electro-Magnetic
Interference. If so, simply reset the product to resume normal operation by following
the instruction manual. In case the function could not resume, please use the product in
other location.
Trouble Shooting
Before taking the unit to be repaired, please check the following table when a problem
occurs. Consult your dealer or service center if the problem cannot be solved with the
following information.
Problem
Power
System does not turn on or
does not respond to the
remote control.
Remote control
No functions or short range.
Pairing the product
Cannot pair successfully
Cannot play properly, the
music plays intermittently
The sound is distorted
Remedy
- Make sure AC/DC power plug is connected to the wall
socket outlet properly and it has power.
- If this does not help, leave the unit unplugged before
seeking advice.
- Insert new batteries.
- Aim remote directly towards the remote sensor
located in center of speaker
- Check whether the speaker is in Off or searching
mode.
- Check whether there are other Bluetooth receivers
around your Bluetooth device. Turn them off to avoid
any disturbance. Attempt to pair again.
- You can click "Forget this device" and then re-pair it
again if required. Search for "ICES IBT-6" on the
Bluetooth device and pair it again.
Check whether the distance between the speaker and
your Bluetooth device is out of its working distance
(10m), or whether there are some obstacles blocking the
communication between the speaker and the Bluetooth
device. Move the speaker or the Bluetooth device to get
the best reception.
Check the volume setting on both the speaker and your
Bluetooth device and adjust the volume to a suitable
level.