LENCO BMC-090 Mode D'emploi page 4

10. Warning! Never insert an object into the product through
the vents or openings. High voltage flows through the
product and inserting an object can cause electric shock
and/or short circuit internal parts. For the same reason,
do not spill water or liquid on the product.
11. Do not use in wet or moist areas such as bathrooms,
steamy kitchens or near swimming pools.
12. Do not use this device when condensation may occur.
13. Although this device is manufactured with the utmost
care and checked several times before leaving the factory,
it is still possible that problems may occur, as with all
electrical appliances. If you notice smoke, an excessive
build-up of heat or any other unexpected phenomena,
you should disconnect the plug from the main power
socket immediately.
14. This device must operate on a power source as specified
on the specification label. If you are not sure of the type
of power supply used in your home, consult your dealer
or local power company.
15. * The socket outlet must be installed near the equipment
and must be easily accessible.
16. * Do not overload ac outlets or extension cords.
Overloading can cause fire or electric shock.
17. * Devices with class 1 construction should be connected
to a main socket outlet with a protective earthed
connection.
18. * Devices with class 2 construction do not require an
earthed connection.
19. Keep away from rodents. Rodents enjoy biting on power
cords.
20. * Always hold the plug when pulling it out of the main
supply socket. Do not pull the power cord. This can cause
a short circuit.
21. Avoid placing the device on any surfaces that may be
subject to vibrations or shocks.
22. To clean the device, use a soft dry cloth. Do not use
4