Control; Airplay Playback; Playing From External Audio Sources; Ipod Operation - Loewe AirSpeaker Mode D'emploi

Loewe AirSpeaker
Instructions for Use

Control

Play

Airplay playback

The Loewe AirSpeaker allows you to play audio signals wirelessly from a
compatible Apple device. A list of which Apple models are compatible
with the Loewe AirSpeaker can be found on page 21.
➠
An operating system with version 4.2.1 or later must be installed
in the Apple device.
Press the S button repeatedly until the corresponding
LED lights up violet.
Start the audio playback on the Apple device.
Press the symbol
volume control of the application currently playing on
the touch screen of the Apple device) and select the
Loewe AirSpeaker for playback.
Set volume - Application on the Apple device
Set volume - +/-

Playing from external audio sources

You can play an external analogue stereo audio source with the Loewe
AirSpeaker.
The source must be connected to the 3.5 mm jack socket AUX
the rear of the unit.
Press the S button repeatedly until the corresponding
LED lights up green.
Start playing the connected audio source.
Set volume - +/-
➠ Set the volume of your audio source to a high setting and use the
+/- buttons on the AirSpeaker to select the desired volume, so
1
as to avoid static noises.
➠ Disconnect your Apple device from the USB connection of the
AirSpeaker while using the AUX
so as to avoid static noises.
- 19 - - 19 -
(usually located next to the
buttons on the AirSpeaker.
1
buttons on the AirSpeaker.
1
8 connection as an audio source,

iPod operation

You can connect your Apple device to the AirSpeaker allowing you to
listen to your music in the very best quality. If the AirSpeaker is switched
on, the accumulator of the connected Apple device is charged. A list of
which Apple models are compatible with the AirSpeaker can be found
on page 21.
Connecting the iPod
Connect your Apple device via the iPod USB cable to the USB socket
on the unit.
6
iPod audio play
Press the S button repeatedly until the corresponding
LED lights up blue.
Start the audio playback on the Apple device.
If you use the optionally available remote control
Assist AirSpeaker, you can also control some basic
functions of your Apple device via this. Please refer to
the user manual of the remote control.
Set volume - Application on the Apple device
Set volume - +/-
➠ Depending on the software version, your Apple device might not
be able to be operated via the AirSpeaker. We recommend updat-
8 on
ing the software of your Apple device to the latest version.
➠ The compatibility with your Apple device can vary depending on
the model. For Apple devices supported see page 21.
➠ Faults can occur depending on the Apple device.
➠ Only disconnect your Apple device from the AirSpeaker when there
is no access to it.
buttons on the AirSpeaker.
1