Publicité
Les langues disponibles
Les langues disponibles
GENERAL PRODUCT SAFETY
WARNINGS
Read all safety warnings and in-
WARNING
structions. Failure to follow the
warnings and instructions may result in electric
shock, fi re and/or serious injury. Save all warn-
ings and instructions for future reference.
WORK AREA SAFETY
• Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
ELECTRICAL SAFETY
• Do not expose heated jacket to rain or wet condi-
tions. Water will increase the risk of electric shock.
• Do not abuse the power cable. Never use the
cord for carrying, pulling or unplugging the
heated jacket. Keep cord away from heat, oil,
sharp edges or moving parts.
PERSONAL SAFETY
• Stay alert, watch what you are doing and use
common sense when using the heated jacket.
Do not use while you are tired or under the infl u-
ence of drugs, alcohol or medication. A moment
of inattention may result in serious personal injury.
PRODUCT USE AND CARE
• Do not use the heated jacket if the power but-
ton does not turn it on and off. Any heated jacket
that cannot be controlled with the power button is
dangerous and must be repaired.
• Disconnect the battery pack from the heated
jacket before storing. Such preventive safety
measures reduce the risk of starting the heated
jacket accidentally.
• Store out of the reach of children and do not al-
low persons unfamiliar with these instructions
to operate the heated jacket. Heated jacket can
be dangerous in the hands of untrained users.
• Maintain heated jacket. Check for breakage of
parts and any other condition that may affect
the heated jacket's operation. If damaged, have
the heated jacket repaired before use.
• Use the heated jacket in accordance with these
instructions, taking into account the working
conditions and the work to be performed. Use
of the heated jacket for operations different from
those intended could result in a hazardous situation.
BATTERY TOOL USE AND CARE
• Recharge only with the charger specifi ed by the
manufacturer. A charger that is suitable for one type
of battery pack may create a risk of fi re when used
with another battery pack.
• Use heated jacket only with specifi cally des-
ignated battery packs. Use of any other battery
packs may create a risk of injury and fi re.
• When battery pack is not in use, keep it away
from other metal objects like paper clips, coins,
keys, nails, screws, or other small metal objects
that can make a connection from one terminal
to another. Shorting the battery terminals together
may cause burns or a fi re.
• Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact ac-
cidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation
or burns.
SERVICE
• Have your heated jacket serviced by a qualifi ed
repair person using only identical replacement
parts. This will ensure that the safety of the heated
jacket is maintained.
SPECIFIC SAFETY RULES FOR
HEATED JACKET
Read instructions carefully.
Use:
• Do not use this heated jacket with an infant,
child, a helpless person, or anyone insensitive to
heat, such as a person with poor blood circula-
tion.
• If you have a medical condition making you sen-
sitive to overheating, or you use any personal
medical devices, consult the devise manufacturer
and/or your physician to determine if use of this
product is appropriate.
• Never use if inner liner is wet.
• Heating elements are not recommended to touch
bare skin.
• Shut off power immediately if discomfort occurs.
• Do not allow the cords to be pinched.
• If improper operation of this heated jacket is
observed, discontinue its use immediately and
contact a MILWAUKEE service facility for repair.
• Do not use pins. They may damage the electric
wiring.
Care:
• Before washing, disconnect and remove battery
pack and battery holder from battery holder
pocket. Push the power cord completely into
the battery holder pocket and fasten closed.
• Follow Care Instructions on jacket tags. Machine
wash, Gentle Cycle in warm water. Tumble Dry
Low Heat.
• Do not bleach.
• Do not iron.
• Do not wring or twist.
• Do not dry clean. Do not use dry-cleaning fl uid on
this heated jacket. Do not bleach. Cleaning solvents
may have a deteriorating effect on the insulation of
the heating element.
• Maintain labels and nameplates. These carry
important information. If unreadable or missing,
contact a MILWAUKEE service facility for a free
replacement.
SPECIFICATIONS
Cat. No. ...............................................201B Series
201G Series
201R Series
221C Series
231B Series
49-24-2310
Volts.............................................................. 12 DC
Battery Type ................................................. M12™
Charger Type................................................ M12™
2
SYMBOLOGY
Volts
Direct Current
Machine wash, gentle cycle in warm water
Do not bleach
Do not wring or twist
Tumble dry, low heat
Do not iron
Do not dry-clean
FUNCTIONAL DESCRIPTION
6
2
3
5
4
8
7
1. Jacket
and Pocket
Power Buttons
High: Red LED
Medium: White LED
Low: Blue LED
2. USB Battery Controller
3. Fuel Gauge
4. USB Power Button
5. Power Cable Port
6. USB Port
7. Battery Controller Pocket
8. Power Cable
ASSEMBLY
Recharge only with the charger
WARNING
specifi ed for the battery. For spe-
cifi c charging instructions, read the operator's
manual supplied with your charger and battery.
Inserting/Removing the Battery
To insert the battery, slide the pack into the body of
the battery controller. Make sure it latches securely
into place.
Insert the power cable (from inside the battery
controller pocket) into the power cable port on the
battery controller.
Place the battery controller into the pocket and zip
closed. If necessary, unzip the expansion zipper to
accommodate larger battery packs.
To remove the battery, push in the release buttons
and pull the battery pack away from the controller.
Using the USB Port
The USB port can be used to charge a cell phone,
MP3 player, or other personal device that uses less
than 5V, 2.1A of DC electrical current. The cord can
be run from the battery controller pocket, through the
grommet and channel on the interior of the jacket,
and through another grommet into a side pocket. It
is not recommend to use the pocket warmer when
an electronic device is charging in a pocket.
To turn on the USB, press the USB power button.
The USB port will remain on for two hours before
1
turning off automatically.
Fuel Gauge
Press the USB power button to display the battery
pack's remaining power.
OPERATION
The zone power buttons are located on the upper left
side of the jacket. Use the jacket
power buttons to control the two zones.
To turn on, press and hold (1 to 2 seconds) the
zone's power button. The zone will be turned to High
and the red LED will light.
Temperature setting can be adjusted at any time
by pressing the zone's power button. Each press
will cycle through the zone's temperature settings.
To turn off the heated jacket, press and hold (1 to 2 sec-
onds) the zone's power button. The LED will turn off.
If the heated jacket turns off unexpectedly, check
connections and charge the battery pack.
3
and pocket
Publicité
