LEAD dynamic DLW Manuel D'utilisation page 4

ENGLISH
Thank you for choosing a product from LEAD energy
AG. If you would like to get in touch with our service
team, please contact them via our website or by
e-mail.
Intended use
The light is designed for dry interior rooms. There is
a charging station at the bottom of the light for wire-
less charging of mobile phones. The charging opera-
tion starts automatically when a suitable smartphone
is placed on the foot pedestal.
1
Installation
Connect the low voltage connector of the power
supply unit to the foot of the light. The plug must sit
tightly. Then insert the plug-in power supply unit into
a usual 230 Volt socket. The plug-in power supply
unit should not be covered, as otherwise it could get
heated.
There is a hidden built-in light diode at the edge of
the charging area. The bulb lights up in RED when
power is fed to it. On laying a mobile phone the LED
lights up in GREEN, when charging, it flashes in
GREEN.
LEAD ENERGY AG Am Stadtbad 37 45219 Essen-Kettwig
Note
Before installation, please observe the attached war-
ning notes without fail!
2
There are three options of charging the mobile phone:
1. The mobile phone has an in-built function for
wireless charging. This function is currently sup-
ported only by the latest mobile telephones.
2. There is a charging cradle for the mobile phone,
which stays on the mobile phone as a protective
cover.
3. There is an adapter to be pasted on the bottom
side of the mobile telephone
Just place the mobile phone on the foot pedestal of
the light. Your mobile phone should lie in the centre.
You don't have to do anything else, because the char-
ging electronics and the mobile phone detect each
other automatically.
Subject to errors and amendments
?
service@lead-energy.com
www.lead-energy.com
Mobil phone charging
Drahtlos Laden
Information / Technical support: www.lead-energy.com