Cabinet Dimensions; Countertop Cutout Dimensions - Amana UXD8630DYS Instructions D'installation Et Guide D'utilisation Et D'entretien

Cabinet Dimensions

A = ¹⁄₂" (12.7 mm)
minimum
21⁵⁄₁₆"
(54.1 cm)
Cutouts are
for 3¹⁄₄" x 10"
(8.3 cm x 25.4 cm)
rectangular or 6"
(15.2 cm) round
vent system.
Locate power
supply junction
box at lower
left-hand
rear corner
of the cabinet.
NOTES:
See cooktop manufacturer's instructions for cooktop cutout
■
depth and width.
Use dimensions for vent system cutout location that applies
■
to your installation.
Interior-mounted blower systems connect with 3
■
(8.3 cm x 25.4 cm) rectangular or 6" (15.2 cm) round vent
system. The cutout locations for this vent system will
depend on your specific installation.
10" (25.4 cm)
21⁵⁄₁₆"
(54.1 cm)
Centerline of cooktop cutout
/ " x 10"
1
4

Countertop Cutout Dimensions

IMPORTANT: Countertops with a bull-nosed front edge are not
recommended for these installations.
Some models require a countertop deeper than 25" (63.5 cm);
see the following illustrations.
To avoid mistakes, it is recommended that the cooktop and vent
cutouts be drawn on the countertop before making any cutouts.
See the Installation Instructions that came with your cooktop
for complete cutout dimensions, location dimensions, and
installation details.
B
A
A. Downdraft vent
B. Cooktop
C. Measurement of cooktop rear
overhang
D. D = Measurement of cooktop rear
overhang (C) + 1 / " (46.2 mm) (E)
13
16
B
A
E
A. ½" (12.7 mm) minimum to
backsplash or rear wall
B. / " (19.1 mm) maximum
3
4
backsplash depth
D
E
F
C
G
H
I
E. 1 / " (46.2 mm)
13
16
F. ½" (12.7 mm) minimum
G. ¼" (6.4 mm) minimum
H. Countertop and backsplash
I. ½" (12.7 mm) minimum
D
C
C. 27 / " (69.9 cm) on 30" (76.2 cm)
1
2
models
33 / " (85.9 cm) on 36" (91.4 cm)
1
2
models
D. D = E + 1 / " (46.2 mm)
13
16
E. Cooktop rear overhang
7