Troubleshooting; Technical Data; Charging Stand; Markings On Product And Battery - BRAND 705220 Mode D'emploi

5 Troubleshooting

5 Troubleshooting
Status LED
The LED's are lit.
The LED's are not lit.
The LED's are flashing

6 Technical data

6.1 Charging Stand

Input
Transmission

6.2 Markings on Product and Battery

Marking
(here: 40 years)
Operating manual
20
Device
HandyStep® is charging.
HandyStep® is not charging (battery charged or no power supply).
An error has occurred.
Charging is not possible.
Reposition HandyStep® in charging stand.
DC 5.0 V 1.4 A, 7.0 W
3.5 W, 110 kHz ... 205 kHz
Meaning
With this mark, we confirm that the product complies with the require-
ments set out in the EC Directives and has been subjected to the speci-
fied testing procedures.
Observe the information provided on the device, the accessories and
in the operating instructions.
China RoHS (EFUP)
EFUP defines the period in years during which the hazardous sub-
stances contained in electrical and electronic equipment do not leak
or change under normal operating conditions. Under normal use by
the user, such electrical and electronic products do not cause severe
environmental pollution, serious personal injury or damage to the
user's property.
DC voltage
Ladeständer 39404 34