Important Safety Precautions - Nidec Shimpo RK-3D Série Mode D'emploi

●Specifications
Model:
Motor:
Drive System:
Wheel head speed:
Speed control:
Wheel head direction:
Wheel head:
Dimensions:
Ship Weight:
●Inspection/Standard Accessories
If upon delivery shipping damage is detected, do not operate the wheel. Notify the shipping carrier
immediately for damage claim instructions. Refer to product nameplate and record serial number
for future reference.
Items included with the RK-3D are:
●Two-piece splashpan.
●Important Safety Precautions
This machine is built specifically for use as a potter's wheel. Use for purposes
other than pottery may put you at risk of danger or harm
●Do not use your wheel with any voltage other than that specified.
●Do not plug power cord into an extension cord (plug directly into an electrical wall outlet).
●Do not pull on the power cord to unplug;pull off at plug.
●Do not overload the wheelhead with more than the recommended weight of clay.
●Do not force the wheel to stop as this may damage your wheel.
●Set up the potter's wheel on a level surface. The top right foot is adjustable and will aid you to level
the wheel.
●Remove the metal cover only when adjusting the pedal stiffness. Refer all electrical repairs to a
qualified electrical technician.
After operating, before cleaning or inspection:
1. Turn ON/OFF switch to OFF
2. Unplug wheel from power source
RK-3D
400W AC230V AC.50Hz Single-Phase
Direct drive DC brushless motor with electric speed control
50Hz 0 ～ 210rpm
Fixed foot pedal with lever
clock wise/counter clock wise
Light alloy casting, diameter 300mm
525(width) ×582(Length) ×515(Height) ㎜
45kg
●T-wrench (for tightening wheelhead).
●Allen wrench for attaching foot pedal.
●Spanner for adjusting feet.
●plastic clip
●Instruction manual.
2
●Foot pedal with hand
lever and grip knob.