Publicité
The facing should never come in contact with masonry product such as mortar, acid or any
other products containing abrasives. Damages and discolouration caused by these products
will void the warranty
This facing assembly contains the following part
1. FP7 facing already assembled ( 1X )
Installing procedure for the facing :
1. After fireplace is install, you may proceed with the
installation of the non combustible wall ( all types
of cement board ) see procedure in installation
manual.
2. Once the fireplace is fully installed, press the
facing against the non combustible material, that
must be installed on the front of the fireplace.
3. Secure the facing to the fireplace with 4 screws
supplied with the fireplace. Always make sure the
facing is squared to the fireplace.
4. Make sure that the doors still slide perfectly.
All manuals and user guides at all-guides.com
FP7 Facing
VA7-FE-06
Warning
1 OF 1
:
June 07
Publicité
