Publicité
6
Gluing the unions onto the lid:
The transparent union is joined to the waste
outlet, the black union to the inlet and the 3
piece union to the outlet on the 'pump' side.
Caution: avoid using excess glue, this could
damage the ball in the valve.
8
Carefully pour the sand into the filter and, using
your hand, spread it out evenly.
9
Mounting the pressure gauge:
Working from the top, put the o-ring into the
groove in the lid.
All manuals and user guides at all-guides.com
12/32
7
Check that the collector plate is correctly
positioned at the bottom of the filter tank. Insert the
collector pipe (topped with its plug) into the hole in
the middle of the collector plate.
MGi 400
Quantity of sand
MGi 400 EH
MGi 500
Grain size
10
Orient the pressure gauge and place it in its
housing.
2009/06 - Indice de révision : F - Code : 0026660
20 kg
25 kg
50 kg
0.6 / 1.25
Publicité
