Publicité
Your wireless chime has different selectable tunes: Ding (one note), Ding-Dong (two note), or West-
minster (eight note) (Available on selected chimes). The factory setting is for the Ding-Dong tune
(or Westminster, when available). This tune can be changed by following the instructions below.
• Ding (one note tune)
Inside Push Button: Add a jumper to location 8.
• Ding-Dong (two note tune)
Inside Push Button: Remove jumper from location 8.
Front of Chime Base: Remove jumper from location 8.
• Westminster (Eight note tune) (Available on selected chimes)
Inside Push Button: Remove jumper from location 8.
Front of Chime Base: Add a jumper to location 8.
Note: All Heath
/Zenith models have both front and back door tune capabilities. We recommend
®
the back door use the Ding tune and the front door use the Ding-Dong tune (or Westminster
tune, available on selected chimes). Models that include two push buttons will come factory set
for front and back doors. Decals on the rear of the push button will indicate its setting.
Chime Volume
Control
VOLUME
Front of Chime Base
All manuals and user guides at all-guides.com
TUNE SETTINGS
Tune Setting (Not
used on all models)
Figure 9
-4-
Tune Setting
Note: Some models might require the use of
tweezers to remove and replace the jumpers.
Inside Push button
598-1172-03
Publicité
