Publicité
Manual IP-Video Server
GB
GB
First Steps
Configuration and Set-up
There is no need to change any configurations for the Behnke door intercom, as the factory setting
for relay 2 is "active during a connected call". The video server usually uses DHCP for IP address
configuration, and it may be set-up entirely via Behnke's IP video software. Please see page 34
on how to set-up the video server via Behnke's IP video software, an explanation to the web
interface for the video server is provided in the annex.
2.2. Language selection
The software will start automatically after you
have inserted the CD, provided the Windows
"AutoRun" option is enabled (standard
setting). First, you will be prompted to choose
a programme language. Should this prompt
not appear automatically, please go to
"My Computer" to select the CD-ROM drive
containing the IP video CD. Double-click on the
file "IP-video.exe" to start the software, and the
language selection dialogue as shown here will
appear.
Once you have selected your programme
language, click "OK" to move on.
32
www.behnke-online.com
Publicité
