Publicité
immerse the device and the thermostat into the water!
9. During cooking, the light may be on indicating that the appliance is
heating up to maintain the desired temperature.
CLEANING AND MAINTENANCE
⚫ After use, position the thermostat to "OFF" position, unplug the power
cord from the wall socket and remove the connector from the plancha.
NOTE: When removing the plug from the wall socket, be sure to grab
the entire plug and do not pull the cord.
⚫ Clean the plancha plate when it is warm with a soft, moist cloth or
paper towel or a soft sponge.
⚫ For dirt residue, once the plancha has cooled, clean the plate with a
soft sponge, moistened with a non-abrasive kitchen cleaner and hot
water.
⚫ Once the cleaning is complete, dry with a soft cloth. Clean the plancha
after each use.
⚫ To clean the connector (thermostat), use a soft, moist paper cloth or
towel. Never immerse the connector in water or any other liquid.
⚫ The plancha is covered with a non-stick surface, so be careful when
handling it.
⚫ DO NOT use sharp metal utensils or knives to cut food on the surface of
the plancha.
⚫ DO NOT place the connector on the surface of the plancha at the risk of
scratching or damaging it.
⚫ DO NOT use a cleaning product, nylon or metal brush on the plancha's
lining at the risk of scratching or damaging it.
⚫ When moving the plancha, always hold it by the handles.
⚫ DO NOT wash the plancha when the connector (thermostat) is
connected.
Publicité
