Publicité
Control
The range hood is designed to remove smoke, cooking vapors
and odors from the cooktop area. For best results, start the hood
before cooking and allow it to operate several minutes after
the cooking is complete to clear all smoke and odors from the
kitchen.
The hood controls are located on the center side of the hood.
Recessing Knobs
• You can hide control knobs by depressing them until flush
with the hood body.
• Pressing the knobs again will lower the knobs, and enable
the user to operate the lights and blower.
10
Controls
A
A. Lamps knob
B. Blower knob
Operating the lamps
1 Turn the light switch to the "ON" position to turn the range hood
lights On.
2 Turn the light switch to the "OFF" position to turn the range hood
lights Off.
Operating the blower
1 Turn the blower switch at "1" to turn the range hood on.
2 Turn the blower switch to the desired speed position.
3 Turn the blower switch to the "MAX" position to turn the
hood on High.
4 Turn the blower switch to the "OFF" position to turn the range hood
blower Off.
Auto On blower
The range hood is equipped with a sensor to automatically turn
on the blower when excessive heat is detected in the control area.
When the blower switch is in the "Off" position, this sensor
will turn the blower to high speed when necessary. When the heat
decreases, the blower will turn off. When the blower switch is in
the On position, the heat sensor is not active and the range hood
functions normally.
B
range
Publicité
