Publicité
CONNECT ELECTRICAL WIRING
Run 120 VAC house wiring to the location of the fan. Use only UL-approved connectors (not included) to attach the house wiring to the wiring plate. Refer
to the wiring diagram, and connect the wires as shown.
SWITCH I
SWITCH II
BLK
WHT
LINE
GRD
IN
SWITCH BOX
INSTALL GRILLE
Install ceiling material to complete the ceiling construction and cut around the fan housing.
Insert the sensor plug into the plug base on the power box first, and then install the grille (for
SA-100DCH-3).
To attach the grille assembly to the fan housing, pinch the grille springs on the sides of the grille
assembly and position the grille into the housing with the grille springs in the appropriate slots. Push
the grille assembly towards the ceiling to secure.
SERVICE PARTS
PART
1
Grille Assembly (includes part 2)
2
Grille Spring
3
Power Box
Blower
4
Blower Wheel
5
Motor
6
Motor Plate
7
Housing
8
Wire Panel / Harness Assembly
9
10
Hanger Bars
11
Wiring Plate
Damper/Duct Connector
12
a
Screw
b
Screw
c
Screw
d
Screw
* Blower Assembly includes part 3, 4, 5, 6, 7, a, b
Replacement installation:
Remove the screw (part a), then take out the blower assembly from
the housing (part 8). Replace the broken parts.
WARNING: Ensure that the fan is switched off from the
supply mains before replacing.
WARRANTY
This warranty covers all defects in workmanship or materials for:
The mechanical and electrical parts contained in this product, for a period of 12 months, from the date of purchase. You must keep and be able to provide your original sales
receipt as proof of the date of purchase. This warranty is covered the original retail purchaser of this product.
THIS WARRANTY DOES NOT COVER:
• Damages from improper installation
• Damages from shipping
• Damages from misuse, abuse, accident, alteration, lack of proper care and maintenance
• Damages from service by persons other than an authorized dealer or service center.
This warranty does not extend to fluorescent lamp starters and tubes.
THIS LIMITED WARRANTY IS GIVEN IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE.
The remedy provided in this warranty is exclusive and is granted in lieu of all other remedies. This warranty does not cover incidental or consequential damages.
BRN
BLK
WHT
GRD
UNIT
PART NAME
b y A i r S p e c i a l i t i e s
BLACK (BLK)
GROUND (GRD)
FAN
SWITCH I
SWITCH II
SWITCH BOX
Qty.
12
1
2
11
d
1
1
1
10
1
9
1
d
1
1
4
1
1
3
3
4
2
4
WHITE (WHT)
BROWN (BRN)
WIRE
UNIT
PANEL
FAN
RECEPTACLE
POWER SUPPLY
120V AC
Visit:www.reversomatic.com
Tool Free:
A
8
c
7
6
b
5
4
a
3
2
1
1.866.890.6457
1.800.810.3473
Publicité
