Twin-Star International 26DE1247 Instructions De Montage page 4

2. Locate Left Side Panel (B) and Right Side
Panel (C) from step 1, Center Top Panel (D2),
Center Shelf (D1) and set out on a scrach free
surface.
Insert one Wood Dowel (N) into each of the
pre-drilled holes. Push Left Side Panel (B) and
Right Side Panel (C) snug to Center Shelf (D1)
and Center Top Panel (D2). Make sure the
Wood Dowel are seated in the pre-drilled holes.
Insert Bolts (L) and Washers (M) into the holes
in the mounting blocks.
HAND TIGHTEN ONLY.
3. Connect the Left Front Panel (B), Right
Front Panel (C) and Center Shelf (D1) with
Connection Plate, tighten Screws (Q) through
the pre-drilled holes.
4. Insert one Wood Dowel (N) into each of the
pre-drilled holes. Attach the Completed
assembly from step 3 to the Hearth/Base (A).
Make sure that dowels are seated into the
pre-drilled holes in the Hearth/Base. Using
Bolts (L) and Washers (M) attach panels
through pre-drilled holes in the mounting
blocks.
HAND TIGHTEN ONLY.
E-3
Center Top
Panel
D2
N
Center Shelf
D1
N
C
Connection
Plate
Q
L
M
N
N N
A
N
N
N
M
L
N
N
N
N
Hearth/Base
N
B