Publicité
3.
Program number or parameter number if "4" is displayed.
4.
Installation Parameter menu.
5.
RF transmission logo.
6.
Type of sensor used and temperature displayed.
Regulation => Internal or external ambient sensor.
Regulation => Floor sensor.
Regulation => Internal sensor with Floor limitation.
View of the outside temperature
7.
Heating demand indication.
8.
Low batteries indicator.
9.
°C or °F unit indicator
10.
Setting or measured temperature if "5" is displayed. Parameter value if
"4" is displayed.
11.
Temporary override function activated, or "ITCS" function if blinking.
12.
Time or parameter title if "4" is displayed.
13.
Program of the current day (the current time bar blinks)
14.
Pictogram for program creation, program state in normal operating
mode.
15.
Key lock indicator
First Installation
2
This section will guide you to set up your thermostat for the first time.
2.1 Batteries installation
- Open the two side's covers and Insert the 2 AAA Alkaline supplied batteries
(or remove the small protection sticker if the batteries are already installed
in the compartment)
- Close the two side's covers.
- Now your thermostat will propose you to adjust the current time and date.
WIRELESS THERMOSTAT USER GUIDE
All manuals and user guides at all-guides.com
6
Publicité
