Publicité
1.There are two U-shaped rods (legs). The one with the crack is the one that "touches the seat."
Attach the other rod to the front center screw.
2. Place the U-piece at the back and screw it to the two holes in the middle and back, securing it
with long screws.
3. Attach the L-shaped bar to the back of the chair with two holding points. Use small screws.
4. Attach the L-shaped bar to the back of the chair with two holding points. Use small screws.
6
ENGLISH
1
4
2
М6x35см 2PCS
М6x60см 3PCS
М6x30см 4PCS
3
Publicité
