Publicité
HOW TO INSTALL
Before Installation
Please unscrew the fixing nut to separate the seat
Close the main water supply valve
cistern hose .
Please keep them aside for a possible use later.
Installation Method
1 Close the main water supply valve, and connect T-shaped connector with the
toilet cistern hose.
Please insert rubber packing between T-shaped connector and the main water pipe.
2 Insert the MF filter into holder-filter by turning counterclockwise.
If MF filter and holder-filter are not tightly coupled, leaking or wrong
operation may be caused.
3 Connect the holder-filter held by MF filter to the T-shaped connector and
fix it with clip-filter. Connect the bidet hose to the holder-filter.
4 Push fixing bolt in to have the heads to be hooked in the installation
board. Insert fixing bolt into the holes and push fixing rubber, fixing
washer in to prevent from wobbling of the main body.
Then tighten up the fixing nuts.
and its cover .
to separate the existing toilet
Publicité
