Cooking In A Single Zone; Air Fry; Bake; Roast - ninja Kitchen FOODI DZ400 Guide De L'utilisateur

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

COOKING IN YOUR 2-BASKET AIR FRYER – CONT.

COOKING IN A SINGLE ZONE

For instructions on using both zones at the
same time, see pages 6–7.
To turn on the unit, plug the power cord into a
wall outlet, then press the power
button.

Air Fry

1 Install crisper plate in the basket, then
place ingredients in the basket, and
insert basket in unit.
2 The unit will default to Zone 1 (to use
Zone 2 instead, select Zone 2). Select
AIR FRY.
3 Use the TEMP arrows to set the desired
temperature.
8
ninjakitchen.com
5 Use the TIME arrows to set the time
in 1-minute increments up to 1 hour.
Press center of dial to begin cooking.
NOTE: During cooking, you can remove
the basket and shake or toss ingredients
for evening crisping. If you would like to
pause during this time, press the zone
number then press center of dial. If using
a single zone, press center of dial.
6 When cooking is complete, the unit will
beep and "End" will appear on the display.
7 Remove ingredients by dumping
them out or using silicone-tipped
tongs/utensils.

Bake

1 Install crisper plate in the basket (optional),
then place ingredients in the basket,
and insert basket in unit.
2 The unit will default to Zone 1 (to
use Zone 2 instead, select Zone 2).
Use the dial to select BAKE.
NOTE: To convert recipes from a traditional
oven, reduce the temperature by 25°F.
3 Use the TEMP arrows to set the desired
temperature.
4 Use the TIME arrows to set the time in
1-minute increments up to 1 hour and in
5-minute increments from 1 to 4 hours.
Press center of dial to begin cooking.
5 When cooking is complete, the unit will
beep and "End" will appear on the display.
6 Remove ingredients by dumping them out
or using silicone-tipped tongs/utensils.

Roast

1 Install crisper plate in the basket (optional),
then place ingredients in the basket, and
insert basket in unit.
2 The unit will default to Zone 1 (to use
Zone 2 instead, select Zone 2). Use the
dial to select ROAST.
3 Use the TEMP arrows to set the desired
temperature.
4 Use the TIME arrows to set the time in
1-minute increments up to 1 hour and in
5-minute increments from 1 to 4 hours.
Press center of dial to begin cooking.
5 When cooking is complete, the unit will
beep and "End" will appear on the display.
6 Remove ingredients by dumping
them out or using silicone-tipped
tongs/utensils.
ninjakitchen.com
9

Publicité

Table des Matières
loading

Table des Matières