Parts; Getting To Know Your Ninja® Foodi® 2-Basket Air Fryer; Functions; Operating Buttons - ninja Kitchen FOODI DZ400 Guide De L'utilisateur

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

PARTS

Air Outlet
(located on back)
Main Unit
Nonstick
Crisper Plates
(one for each basket)
4 ninjakitchen.com
Air Intake Vent
Control Panel
Nonstick Baskets
(one for each zone)
GETTING TO KNOW YOUR NINJA® FOODI®
XL 2-BASKET AIR FRYER
When setting time, the digital display shows HH:MM.

FUNCTIONS

AIR FRY: Use this function to give your food
crispiness and crunch with little to no oil.
BAKE: Create decadent baked treats
and desserts.
ROAST: Roast meats to tenderize and
more.
AIR BROIL: Add the crispy finishing touch
to meals, or melt toppings to create the
perfect finish.
REHEAT: Warm your leftovers, with
a crispy result.
DEHYDRATE: Dehydrate meats, fruits, and
vegetables for healthy snacks.

OPERATING BUTTONS

Controls the output for the basket
1
on the left.
Controls the output for the basket
2
on the right.
TEMP arrows: Use the up and down arrows
to adjust the cook temperature before or
during cooking.
TIME arrows: Use the up and down arrows
to adjust the cook time in any function
before or during the cook cycle.

BEFORE FIRST USE

1
Remove and discard any packaging material, promotional labels, and tape from the unit.
2 Remove all accessories from the package and read this manual carefully. Please pay
particular attention to operational instructions, warnings, and important safeguards
to avoid any injury or property damage.
3 Wash the baskets and crisper plates in hot, soapy water, then rinse and dry thoroughly.
The crisper plates and baskets are the ONLY dishwasher-safe parts. NEVER clean the
main unit in the dishwasher.
SMART FINISH button: Automatically
syncs the cook times to ensure both zones
finish at the same time, even if there are
different cook times.
MATCH COOK button: Automatically
matches Zone 2 settings to those of Zone 1
to cook a larger amount of the same food,
or cook different foods using the same
function, temperature, and time.
DIAL: Turn the dial from side to side to
select desired cook function. Press center
of dial to start or pause cooking.
POWER BUTTON: The
button turns
the unit on and off and stops all
cooking functions.
Standby Mode: After 10 minutes of no
interaction with the control panel, the unit
will enter standby mode. The Power button
will be dimly lit.
Hold Mode: Hold will appear on the unit
while in SMART FINISH mode. One zone
will be cooking, while the other zone will
be holding until the times sync together.
NOTE: Not all models include all functions.
ninjakitchen.com
5

Publicité

Table des Matières
loading

Table des Matières