WARNING: Do not use electrical equipment inside the
foodstuffs storage compartment, unless it is of a type
recommended by the manufacturer.
WARNING: Do not use mechanical tools or other means to
speed up defrosting, unless they are recommended by the
manufacturer.
WARNING: Keep the cabinet's ventilation openings clear in
the enclosure or the built-in space around the cabinet.
Do not connect the device to a power supply without overload
protection (protected by an electrical fuse).
Never use power-strips or extension cords to connect the
device to the mains.
This device is not destined for use with an outside timer or
remote control system or any device that switches it on
automatically.
Do not use the device to store explosive substances such as
aerosols that contain flammable propulsion gas.
After installing the cabinet, ensure that it is not resting on the
power cord.
If the power cord is damaged, it must be replaced by the
manufacturer, by customer care service, or by similarly
qualified personnel in order to prevent electrical hazards.
The device is heavy; be careful when moving it.
If your cabinet was laid down in a horizontal position during
transportation, wait 48 hours before operating it.
In the event of accidental liquid spillage (broken bottles or
other) on electrical components (motor or other), immediately
unplug the device from the mains.
Ensure that you put your cabinet in a place that can support
its weight when loaded (1 bottle containing 75 cl weighs
approximately 1.3 kg).
Your cabinet must be placed on a level surface. If you have
placed it on a rug or on carpeting, insert a support beneath it.
55