Publicité
• When the controller (3) is switched to the desired position, the number of
the desired setting will light up on the display (4) on the controller.
• If the heat is too high, switch the controller to position 2 (medium) or 1
(low).
• To power OFF the device, switch the controller to "0" and the LED indicator
will no longer light up.
Note! The device will only release heat after approximately 10 minutes.
AUTO OFF
The device will switch off automatically after ± 8 hours.
If you want to use the device again when it is in auto off mode, set the setting
switch (5) on the controller to "0" and then switch it to the desired setting.
To turn the device OFF, set the setting switch (5) on the controller to "0" and
the power LED indicator will no longer light up.
Switch OFF the device if you are no longer using it and remove the plug from
the power socket.
4) CLEANING AND MAINTENANCE
Important! The device can be cleaned, as long as the instructions
below are followed strictly.
Do not puncture
Do not use bend or folded
30 degree normal wash
Do not bleach
Do not tumble dry
Do not iron
Do not dry clean
• Remove the power plug (6) from the electrical outlet
• Remove the controller connector (2) from the device.
• Allow the device to fully cool down (± 30 minutes) before cleaning or
folding.
• Small dirt spots can be cleaned with a damp cloth.
• Never use aggressive or abrasive cleaning materials, a scouring sponge
or steel wool; they will damage the device.
• If you want to wash the device, follow the textile label or the instructions
provided above.
• Always let the device fully dry before using it again.
• Never immerse the device's controller in water or any other liquid.
• Clean the controller with a damp cloth.
• Store the device in a dry place.
• Do not crease the device by placing items on top of it during storage.
5) SPECIFICATIONS
• Power input: 220 – 240 Vac, 50/60 Hz, Class II
• Power: 55 - 60 W
• Power cord length: ± 230 cm
• 100% polyester
• Dimensions: 150 x 80 x 0.5 cm (H x W x D)
• Weight: ± 890 g (incl. controller)
6) STORAGE & TRANSPORTATION
• When storing the device, it should first be cleaned in accordance with this
user manual. The device should be stored in its original packaging.
• Always store the device in a dry and well-ventilated room and beyond the
reach of children.
• Protect the device against vibrations and shocks during transport.
All contents and specifications mentioned in this manual are subject to
change without prior notice.
INSTRUCTIONS FOR PROTECTING THE ENVIRONMENT
(WEEE, the waste electrical and electronic equipment directive,
applicable in EU member states)
Your product has been manufactured using high quality materials
and components which can be recycled and used again. At the end of its
service life, this product cannot be disposed of in normal domestic waste,
but must be taken to a special collection point for recycling electrical
and electronic equipment. This is indicated in the user manual and in the
packaging by the crossed-out wheeled dust bin symbol. Used raw materials
are suitable for recycling.
You can ask your local competent council about the location of your nearest
collection point.
By recycling used appliances or raw materials, you are playing an important
role in protecting our environment.
Correct disposal ensures that waste electrical and electronic equipment
(which may contain hazardous substances) is recycled and reused
appropriately. It helps avoid potential damage to the environment and
human health, wildlife and to preserve natural resources.
Batteries:
Do not dispose batteries in your household waste. Dispose of batteries by
taking them to your local recycling station. Contact your local competent
government offices for details.
Following information is only valid for EU member states.
If the battery contains higher values of lead (Pb), mercury (Hg) and/
or cadmium (Cd) than defined in the Battery Directive (2006/66/EC),
the chemical symbols Pb, Hg and/or Cd are shown below the
crossed-out wheeled dust bin symbol.
EN
3
Publicité
