Publicité
Operation
1
Locking and unlocking the unit
IMPORTANT : The drawers must be fully closed before
locking / unlocking the unit.
To unlock, insert key at the 12:00 position and turn clockwise
the 6:00 position. The cabinet should be unlocked.
To lock, ensure all drawers are secure. Place key in the
6:00 position and turn counterclockwise to the 12:00 position.
Remove key.
The cabinet lock and key will be marked with a matching
3 digit number.
801
key# is from 801 to 810
3
Installing the drawers
Pull the slides and slide carrier out until fully extended .
Align the slide brackets on the drawers with the
extended slides.
Guide the drawer bracket into the slides while holding
the slides securely open.
Slowly push the drawer until it is fully closed to engage
the slide.
Open the drawer and close it to verify proper operation.
801
6
2
Removing the drawers
Pull the drawer out until fully extended. Push down on
the right-hand side to release lever.
Push up on the left-side to release lever.
Gently remove drawer.
Please contact 1-888-43-HUSKY for further assistance .
.
HUSKYTOOLS COM
.
Publicité
