Publicité
3.2.2 optional glass stand installation
B
C
X5
E
Place appliance on a soft clean surface.
A.
Remove the 4 screws from the bottom of the appliance (Fig. 1). Do not throw away screws.
B.
Using the same screws, align the center stand piece to the bottom holes and secure it into the appliance
C.
(Fig. 2).
Prepare the glass base and ensure that the rubber feet of the glass base are facing away from the
D.
appliance (Fig. 3).
Using the 5 screws included in the kit (C X 5), secure the glass base into the center piece.
E.
Check if the glass stand is secured properly. Ensure appliance is standing straight and still (Fig. 4).
F.
Fig. 1
Fig. 3
A
B
A
B
D
D
X1
Fig. 2
Fig. 4
C
C
installation
E
E
X1
W415-3009 / A / 07.29.21
EN
11
Publicité
