Publicité
INSTALLATION
2.
Push seat bottom and backrest of booster seat
down and back into vehicle seat until there is
secure positioning with the booster seat and
vehicle seat bottom and vehicle seat back. A
gap is acceptable as long as the head support is
touching the vehicle seat back or head rest.
IMPORTANT:
It may also be necessary to adjust the recline angle of the
booster seat to match that of the vehicle seat.
DISENGAGING LOWER ANCHOR INSTALLATION
1.
To release the ISOFIX connectors, pull the tab next
to the lock button on one connector and pull the
seat away from the vehicle seat. Repeat for the
other ISOFIX connector.
2.
Remove the seat from the vehicle.
3.
To store the ISOFIX connectors, push connectors towards the seat
bottom until they "click" locked into the storage position.
18
1-855-463-4666
All manuals and user guides at all-guides.com
The head support height can be adjusted for best fit
to your child and to ensure proper placement of the
Vehicle Shoulder Belt.
1.
2.
3.
WARNING!
fitting the child in the vehicle seat.
ADJUSTING THE HEAD SUPPORT
Turn the head support locks outwards to unlock
the head support.
Grip the handle adjustment and pull it out and
upwards to adjust the head support.
When it reaches the desired height, release the
handle and turn the head support locks inward to
lock it fully into position.
Adjust the head support height before
diono.com
1
2
3
19
Publicité
