Publicité
STICK BLENDER
Introduction
To get the most out of your new stick
blender, please read through these
instructions before use. Please also save the
instructions in case you need to refer to them
at a later date.
Technical data
Voltage/frequency:
Power rating:
Class II: The appliance is double
insulated and therefore does not
require earthing.
Main components
1. On/off button
2. Motor section
3. Stick blender attachment
10
All manuals and user guides at all-guides.com
220-240 V~ 50/60 Hz
200 W
1
2
3
Special safety instructions
The blade on the stick blender attachment is
extremely sharp. Never touch the blade with
your fi ngers.
Never allow fi ngers, hands or other objects
near the rotating blade.
Always unplug the stick blender from the
mains before assembling, separating or
cleaning it, before placing fi ngers, hands
or objects near the blade, or if it is left
unattended.
The stick blender is intended for the
preparation of foodstuff s only.
Never use the stick blender in food at
temperatures over 60 °C.
Please note that when you use the stick
blender, there may be splashes and spraying
from the stick blender attachment and from
the holes around the stick blender.
Do not run the blender for more than 30
seconds at a time. Allow it to cool for at least
1 minute before using it again.
Wash the stick blender attachment in hot
soapy water before using the blender for the
fi rst time.
The motor section must not be exposed to
water.
Do not use the blender to chop ice or other
very hard substances.
The stick blender must not be used by
children unless they are supervised.
The stick blender is only intended for use in
private households.
Publicité
