Page 2
All manuals and user guides at all-guides.com Warranty Information Read Before Beginning Assembly DHP warrants this product to be free from defects in material and workmanship and ● Call our toll free number if you need assistance. agrees to remedy any such defect. This warranty covers one year from the date of ●...
Page 3
All manuals and user guides at all-guides.com Parts Replacement Parts, visit www.dhpfurniture.com/eng/replacement-parts This item is packed in 2 boxes! All parts listed on this page are in Box A. If Box B is missing please contact your Retailer. There are inner box(es) that include components required to complete this assembly.
Page 4
All manuals and user guides at all-guides.com Parts Replacement Parts, visit www.dhpfurniture.com/eng/replacement-parts This item is packed in 2 boxes! All parts listed on this page are in Box B. If Box A is missing please contact your Retailer. Before you throw the package, please use the Check Box to identify the parts and ensure that you have all the parts needed for the assembly.
Page 5
All manuals and user guides at all-guides.com Hardware Pack Hardware Pack #: T4240449-00 1/4" X 3/4" X 36 5/16" X 1 9/16" 1/4" X 1 9/16" X 14 5/16" X 3" Please do not completely tighten all the hardware, until the entire assembly is complete, unless otherwise indicated in the step-by-step instructions.
Page 6
All manuals and user guides at all-guides.com Step 1 ❶ Attach G/S to C with Note: holes are located on top side...
Page 7
All manuals and user guides at all-guides.com Step 2 ❶ Attach G/T to D with Note: holes are located on top side...
Page 8
All manuals and user guides at all-guides.com Step 3 ❷ Attach E to C with Note: Slat holes on E towards upside...
Page 9
All manuals and user guides at all-guides.com Step 4 ❷ Attach E to D with Note: Slat holes on E towards upside...
Page 10
All manuals and user guides at all-guides.com Step 5 ❹ Attach Z to A2 with Repeat the same step for remaining parts Z/A1.
Page 11
All manuals and user guides at all-guides.com Step 6 ❶ ❸ Screw into A2 and into A2 at the specified locations as shown , leave half of the thread exposed. Repeat the same step for remaining parts Do not completely tighten the BOLTS, leave half of the thread exposed.
Page 12
All manuals and user guides at all-guides.com Step 7 7.1 Hang sub-assembly C on A2 as illustrated, Attach E to A2 with ❷ . Repeat the same step for remaining parts D/E/A1.
Page 13
All manuals and user guides at all-guides.com Step 8 Hang A onto A1 and A2 as illustrated .
Page 14
All manuals and user guides at all-guides.com Step 9 Properly fasten the bolts at all locations in the compartments as illustrated. Note: Open the compartment on the back of Headboard A to access and tighten bolts, after assembly, properly close the compartment using velcro .
Page 15
All manuals and user guides at all-guides.com Step 10 ❹ Attach Z x 2 to B with...
Page 16
All manuals and user guides at all-guides.com Step 11 Do not completely tighten the ❶ BOLTS, leave half of the thread Screw into B , leave half of the thread exposed. exposed.
Page 17
All manuals and user guides at all-guides.com Step 12 Hang sub-assembly C and D on B as illustrated, don't completely tighten the bolts until STEP 14 is complete.
Page 18
All manuals and user guides at all-guides.com Step 13 ❶ Attach L x 2 to F with...
Page 19
All manuals and user guides at all-guides.com Step 14 ❶ Attach F to A and B with Then properly tighten all the bolts.
Page 20
All manuals and user guides at all-guides.com Step 15 15.1 Insert P1 into X; 15.2 Press X into E, repeat the same procedure for the opposite side of the bed. Follow the same procedures going backwards for every row of slats. 15.1 15.2 SLAT WARNING...
Page 21
All manuals and user guides at all-guides.com Step 16 16.1 Insert Y x 2 onto the free end of both P1 assembled in previous step, Take a new P1 and insert each end into the other free end of Y x 2; 16.2 Press Y x 2 SIMULTANEOUSLY into F x 2 as illustrated.
Page 22
All manuals and user guides at all-guides.com Helpful Hints Helpful Hints Weight Limit: 500 Lb / 227 Kg ● Move your new furniture carefully, with two people lifting and carrying the unit to its new location. ● Your DHP furniture can be disassembled and reassembled to move.
Page 23
All manuals and user guides at all-guides.com 4240449 NO LO REGRESE A LA TIENDA ! Cama Tapizada Si le faltan piezas o las que se incluyen están dañadas, con mucho gusto le enviaremos sus piezas de reemplazo sin cargo extra.
Page 24
All manuals and user guides at all-guides.com Partes Instrucciones Paso 1 Una G/S con C con los ❶ . Piezas de reemplazo, visite www.dhpfurniture.com/spa/replacement-parts Paso 2 Una G/T con D con los ❶ . Este artículo se embala en 2 cajas! Paso 3 Las piezas nombradas abajo están en la Caja A.
Page 25
All manuals and user guides at all-guides.com Límites de peso: 500 Lb / 227 Kg Consejos útiles ● Mueva sus muebles nuevos con cuidado, con dos personas levantando y llevando el aparato a su nueva ubicación. ● Sus muebles DHP se pueden desmontar y volver a ensamblar en caso de mudanza.
Page 26
All manuals and user guides at all-guides.com 4240449 NE RETOURNEZ PAS AU MAGASIN ! Upholstered Bed Si une pièce est manquante ou endommagée, nous vous expédierons avec plaisir vos pièces de remplacement gratuitement. Très grand lit deux places Visitez www.dhpfurniture.com/fre/replacement-parts...
Page 27
All manuals and user guides at all-guides.com Pièces Instructions Pour les pièces de rechange, visitez www.dhpfurniture/fre/replacement-parts Étape 1 Attacher G/S à C avec ❶ . IMPORTANT: La liste des références ci-dessous est propre à votre produit. Étape 2 Veuillez le garder sous la main lorsque vous appelez des pièces de rechange. Attacher G/T à...
Page 28
All manuals and user guides at all-guides.com Limite de Poids: 500 Lb / 227 Kg Conseils utiles ● Déplacez votre nouveau mobilier avec soin, nous recommandons deux personnes pour soulever et transporter le mobilier vers son nouvel emplacement. ● Votre mobilier DHP peut être démonté et reassemblé pour faciliter les déménagements.