Publicité
This fine pump that you have just purchased is designed from the latest in
material and workmanship.
Before installation and operation, we recommend the following procedures:
Check with your local electrical and plumbing codes to
A
ensure you comply with the regulations. These codes
have been designed with your safety in mind. Be sure you
comply with them.
A separate circuit have to be lead from the home electrical
B
distribution panel properly protected with a fuse or a circuit
breaker. We also recommend that a ground fault circuit be
used. Consult a licensed electrician for all wiring.
The ground terminal on the three prong plugs should
C
never be removed. They are supplied and designed
for your protection.
Never make adjustments to any electrical appliance or
D
product with the power connected. Do not only unscrew
the fuse or trip the breaker, remove the power plug
from the receptacle.
APPLICATION
This submersible utility pump is designed for
a portable application, for dewatering around
homes.
This pump is great for water transfer from
basin, pool cover, flooded floor, flat roof.
May also be used for average flow fountain.
CAPACITY :
5'
740 US GPH
1 0'
500 US GPH
1 5'
100 US GPH
2
FOR INFORMATION | TEL : 514.337.4415 | FAX : 514.337.4029
SAFETY INSTRUCTIONS
Friction loss
in pipe not
included.
FEATURES
Non-corrosive material.
Stainless steel mechanical rotary seal.
Thermal and overload protection.
1/6HP, 115VAC, 60Hz, 0.8A, 1.6A (when start).
NOTICE
This unit is not designed for applications to
pump salt water or brine.
Use with salt water or brine will void warranty.
Publicité
