Publicité
Switching on the Yoghurt Maker
1. Insert the power plug into the wall
socket. The display will show the follow-
ing readings:
2. Press the button Set (A) once. You will
see "08" and the green control light Time
(C) will start flashing for approx. 5 sec-
onds.
Wait approx. 5 seconds until the display
changes to the temperature settings.
You will see the "42". The green control
light Time (C) will light up permanently
and the control light Temp (D) will start
flashing for approx. 5 seconds.
Wait approx. 5 seconds. As soon as both
LED light up red, the yoghurt maker
starts with the ripening process.
You will hear a short confirmation sound.
The time will count down.
When the time has elapsed you will hear
a signal sound.
3. Pull the power plug and place the
ready yoghurt into the refrigerator.
Stop/Reset Button
With the Stop/Reset Button (F) you can reset the settings in order to make
new settings.
1. After switching on the yoghurt maker
resp.
during
Stop/Reset button pressed for some
seconds until the following readings
will appear.
All manuals and user guides at all-guides.com
Operation
operation
hold
the
Set
16
Set
Set
Set
Set
Stop
Reset
Stop
Reset
Stop
Reset
Stop
Reset
Stop
Reset
Publicité
