Publicité
ASSEMBLY INSTRUCTIONS
1.
Carefully unpack unit and examine all packaging to be sure all
parts are included.
2.
Place unit on a flat and stable surface.
3.
Be sure On/Off switch is "OFF" position (button is up).
4.
check that the Blade is secure and Blade Locking screw is in LOCK
position. To "lock" turn screw one quarter turn counter-clockwise.
5.
Always keep the Blade Guard covering the Blade until ready to
use. BLADE IS SHARP - ALWAYS HANDLE WITH CARE!
6.
Check that the Locking Bolts are secure. To tighten, turn
clockwise. For the Lower Locking Bolt use the handle from the
Upper Bolt as a tool.
REMOVE MOTOR ASSEMBLY
1.
Remove Slicing Guard and Food Carriage by tilting carriage bed
away from Motor Assembly.
2.
Remove the Blade Guard and Blade Locking Screw by turning
clockwise one-quarter turn. Carefully pull the Blade off and hold
by using the center of blade.
3.
Remove the Upper Locking Bolt by turning counter-clockwise.
4.
Gently lay the unit on its back, this will give access to the Lower
Locking Bolt.
5.
Remove Lower Locking bolt using the end of the Upper Bolt as a
tool.
6.
Lift unit to upright position, support Motor Assembly while lifting.
7.
Hold firmly and lift Motor Assembly upward to remove.
8.
Reverse steps to assemble.
All manuals and user guides at all-guides.com
Upper Locking Bolt
Lower Locking Bolt
4
Publicité
