Publicité
CLEANING AND CARE
SPRAY ARMS
The upper and lower spray arms can be removed for
cleaning.
Periodically check whether the holes for the upper and
lower spray arms are clogged. If you see any clogging,
remove the spray arms and clean them under running
water.
The impellers should be cleaned once a week for the
appliance to operate efficiently.
To remove the upper spray arm:
1) Hold the nut and rotate the arm clockwise.
To remove the lower spray arm:
1) Pull out the spray arm upward.
48
2) Wash the arms in soapy and warm water and use a soft
brush to clean the jets. Reposition them after rinsing
them thoroughly.
Fig. 61
Fig. 62
Fig. 63
Publicité
