Publicité
INSTALLATION
INSTALLING THE OUTER DOOR PANEL (DEPENDING
ON MODEL)
Before starting the installation of the custom door panel,
make sure that the measurements are within the ranges
specified in the CUSTOM DOOR PANEL (FOR PANEL-
READY MODELS) section of this manual.
1) Install the hook on the aesthetic panel (see Fig. 16) and
put the hook into the slot of the outer door of dishwasher
(see Fig. 17). After positioning of the panel, press top of
the aesthetic panel to make sure that the plastic hook
are fastened.
20
NOTE
In any cases, please DO NOT insert the
fingers into the side holes on dishwasher
door, since that may cause serious hazard.
Please DO NOT leave the installation hole
open after installation. Plug the holes by
the
installation to avoid any potential damage
to children
NOTE
Before mounting the wooden door on the
dishwasher, mount the handle on the
wooden door as in Fig. 20 .
Fig. 16
Fig. 17
rubber
plug
immediately
after
Publicité
