Publicité
Note:
•
To prevent system crashes, please use a high-speed micro SD card
(Class 10 or above) with a capacity between 8GB to 32GB.
•
Set up the date and time of your DVR through menu settings before
putting it to use.
•
The DVR does not support hot plugging. Be sure to insert the micro SD
card after powering off the DVR.
•
Remove the lens protector before use.
LED Indicator
LED Indicator
Status
REC Indicator on
Not recording
REC Indicator flashing
Recording
Power Indicator on
Dash cam powered on
Power Indicator off
Dash cam powered off
MIC Indicator on
Audio recording activated
MIC Indicator off
Audio recording disabled
All manuals and user guides at all-guides.com
Operation Guide
Installing the DVR
① Ideal Mounting Area
1) Power off your car engine.
2) Insert the micro SD card into the micro SD slot.
3) Mount the DVR on a spot with its screen in your line of sight. Install the
DVR by:
a. Mounting the DVR on the suction mount and then stick the mount on an
appropriate place in your car.
b. Use the included 3M sticker to mount the DVR. Please note the mounting
area will be slightly smudged after being removed.
4) Connect one end of the cable to the mini USB port of the DVR, run the
cable along the edge of the windshield and steer away from the airbag
①
②
② Connect to Car Charger
03/04
Publicité
