Krüger Technology KGM15020F Manuel D'utilisation Et D'entretien page 23

Starting stages
1. Open the water supply cock (A).
2. Open the gun and keep it open for a few seconds to allow the air in the
pipes to come out (B).
WARNING: Grip the lance and the gun firmly with both hands.
3. Push the green button ON (C).
A
Stages to turn the machine off
1. Turn off the water supply tap (A).
2. Open the spray gun (B) and hold it open for a couple of seconds so that
the water in the line drains out
3. Close the spray gun.
4. Push the red button OFF (C).
5. Disconnect the machine from the electric supply by removing the plug
from the power socket.
A new machine needs a short period for running in the motor/pump set. Running in
consists of operating the machine for no more than 1 hour and waiting for 1 hour
for it to cool down; this should be done for 4 or 5 times.
USE
B
WARNING:
Grip the lance and the gun firmly
with both hands.
WARNING:
23
KGM15020F-KGM20020F
C