Publicité
All manuals and user guides at all-guides.com
3. Clean filtration mesh with mild detergent and soft brush.
4. Make sure filtration mesh is completely dry before installing.
Cleaning the water tank
1. Remove plug from wall outlet.
2. Pull out the water tank.
3. Clean the water tank with a little mild detergent on a towel and then rinse in
water.
4. Put the water tank in place after cleaning.
Cleaning the body
Clean the body with a little mild detergent on a soft cloth.
Note:
Unplug from outlet before cleaning.
No water on the control panel.
CIRCUIT DIAGRAM
22
Publicité
