Publicité
Liens rapides
Owner's Manual Sahara HD
READ AND SAVE THESE INSTRUCTIONS
WARNING
This unit must be electrically
grounded
The power cord is equipped with a 3-
prong grounding plug. Use only with
a matching receptacle.
Do not cut off the grounding prong.
Do not use an adapter.
Do not use with a damaged power
cord
Do not use an extension cord.
To reduce risk of fire or electric
shock, do not use this airmover with
any solid-state speed control device.
Read and understand manual
before operating.
Use a 115V, 3-prong
Do not use with
grounded connection
an adaptor
WARNING! Do not alter or modify your
Sahara in any way. Use only replace-
ment parts authorized by Dri-Eaz
Products, Inc. Modifications or use of
unapproved parts could create a haz-
ard and will void your warran-
ty. Contact your authorized Dri-Eaz
distributor for assistance.
07-01534H F352
All manuals and user guides at all-guides.com
DRI-EAZ PRODUCTS, INC.
15180 Josh Wilson Road, Burlington, WA USA 98233
Fax: (360) 757-7950 Phone US: 800-932-3030
Model F352
Patents: http://www.LBpatents.com
Dri-Eaz TurboDryers are high-performance airmovers that promote the
evaporation of moisture from materials in order to speed the drying
process. They are durable and easy to operate, utilizing an effective
balance of static pressure and airflow.
D
S
RYING
URFACES AND
Placement of TurboDryers
When drying the interior of a building, use at least one TurboDryer per water-
damaged room, or one every 200 square feet. Try to get airflow to all wet sur-
faces. Open interior doors to improve air circulation, and brace doors to pre-
vent them from blowing shut.
WARNING
and unpredictable movement.
Do not allow children to play with or around TurboDryers. If they lift or get
a unit off balance, the powerful airflow can cause the TurboDryer to move
rapidly, risking injury.
Do not alter or modify your Dri-Eaz product in any way. Use only replace-
ment parts authorized by Dri-Eaz Products, Inc. Modifications or use of
unapproved parts could create a hazard and will void your warran-
ty. Contact your authorized Dri-Eaz distributor for assistance.
WARNING
b) Do not run cord under carpeting. Do not cover cord with throw rugs,
runners, or similar coverings. Do not route cord under furniture or appli-
ances. Arrange cord away from traffic area and where it will not be tripped
over.
O
Y
PERATING
OUR
Locate the electrical cord and plug into a standard 3-prong outlet.
Set the switch to the desired speed, based on amp draw as listed
by the switch on the side control panel.
LegendBrandsRestoration.com
Use and Operation
M
ATERIALS
Do not move or carry a TurboDryer while under
operation. When the unit is in motion, the powerful
airflow is hard to control, and can produce rapid
a) Do not operate any fan with a damaged cord or
plug. Discard fan or return to an authorized service
facility for examination and/or repair.
T
D
URBO
RYER
Dri-Eaz Products, Inc.
Publicité
Manuels Connexes pour Dri-Eaz Sahara HD F352
Sommaire des Matières pour Dri-Eaz Sahara HD F352
- Page 1 Do not alter or modify your Dri-Eaz product in any way. Use only replace- any solid-state speed control device. ment parts authorized by Dri-Eaz Products, Inc. Modifications or use of...
- Page 2 Constant opera- tion or use in other environments may require additional maintenance. Do not expose to rain, water or Contact Dri-Eaz for more information. snow. NOTE: Do not oil motor bearings; they are permanently oiled.
- Page 3 8. Pull motor assembly out of the housing. To reassemble unit: Follow the steps above in reverse order (starting with #8). Note: Before tightening shaft nut on wheel, ensure that bolt is aligned with flat spot on shaft (see photo A). 07-01534H F352 Dri-Eaz Products, Inc.
- Page 4 Turn on switch Blower wheel jammed Remove material jamming wheel Intake or exhaust blocked Turn machine off and allow to cool, then remove blockage Unit vibrates excessively Accumulation of soil on wheel Clean blower wheel 07-01534H F352 Dri-Eaz Products, Inc.
- Page 5 No altere ni modifique su producto de ninguna manera. Utilice únicamente ción dañado. repuestos autorizados por Dri-Eaz Products, Inc. El uso o modificación de No utilice con un cable de extensión. repuestos no aprobados podría ocasionar algún peligro y anulará su ga- No utilice este ventilador con ningún...
- Page 6 La operación constante o el uso en otros ambientes puede requerir de un No la exponga a la lluvia o a la nie- mantenimiento adicional. Comuníquese con Dri-Eaz para mayor infor- mación. No moje el motor, el exterior o los NOTA: No ponga aceite en los rodamientos del motor;...
- Page 7 Siga los pasos anteriores en orden inverso (comenzando con el paso Nº 8). Nota: Antes de apretar la tuerca del eje de la rueda, compruebe que el perno esté alineado con la parte plana del eje (consulte la fotografía A). 07-01534H F352 Dri-Eaz Products, Inc.
- Page 8 Enlever ce qui bloque la roue Éteindre l’appareil, laisser le refroidir, puis enlever ce qui Entrada o salida bloqueada bloque La unidad vibra excesivamente Acumulación de tierra en la rueda Nettoyer la roue de ventilation 07-01534H F352 Dri-Eaz Products, Inc.
- Page 9 Ne pas altérer ou modifier l’appareil de quelque façon. Utilisez les Ne pas utiliser de rallonge. pièces de rechange autorisées par Dri-Eaz Products, Inc modifications N’utilisez pas ce ventilateur avec aucun ou l’utilisation de pièces non approuvées pourrait créer un danger et dispositif de commande de vitesse à...
- Page 10 Une utilisation constante ou dans d’autres situations peuvent exiger plus courant compatible. d’entretien. Communiquer avec Dri-eaz pour plus d’information. Ne pas couper la broche de contact NOTE : Ne pas huiler les paliers du moteur : ils sont huilés de façon perma- de terre.
- Page 11 Suivre les étapes ci-dessous à l’envers (commencer par le no 8). Note: Avant de resserrer l’écrou de l’arbre de roue, s’assurer que le boulon est bien aligné à la partie plate de l’arbre de roue (voir la photo A). 07-01534H F352 Dri-Eaz Products, Inc.
- Page 12 Enlever ce qui bloque la roue Éteindre l’appareil, laisser le refroidir, puis enlever L’entrée ou la sortie d’air est bloquée ce qui bloque L’appareil vibre excessivement Accumulation de saleté sur la roue Nettoyer la roue de ventilation 07-01534H F352 Dri-Eaz Products, Inc.