Publicité
INSTALLATION
Space Requirement
•
Select a location without direct exposure to sunlight;
•
Select a location with enough space for the refrigerator doors to open easily;
•
Select a location with level (or nearly level) flooring;
•
Allow sufficient space to install the refrigerator on a flat surface;
•
Allow clearance to the right, left,back andtop when installing. This will help reduce
power consumption and keep your energy bills lower.
Levelling the refrigerator
To do this adjust the two levelling feet at front of the unit.
If the unit is not level, the doors and magnetic seal alignments
will not be covered properly
Location
The appliances should be installed well away from sources of heat such as radiators, boilers, direct sunlight
etc. Ensure that air can circulate freely around the back of the cabinet. To ensure best performance, if the ap-
pliance is positionned below an overhanging wall unit, the minimum distance between the top of the cabinet
and the wall unit must be at least 100 mm. Ideally, the appliances should not be positionned below overhan-
ging wall units. Accurate leveling is ensured by one or more adjustable feet at the base of the cabinet.
WARNING! It must be possible to disconnect the appliances from the mains power supply; the plug must therefore
be easily accessible after installation.
All manuals and user guides at all-guides.com
4
MFF101W
Publicité
