Publicité
The Receiver
Collar is not
beeping when
setting up the
Boundary
Zone.
The Receiver
Collar is not
beeping or
administering
a Static
Correction.
The Receiver
Collar is
beeping
everywhere.
10
1-800-732-2677 (US) / 1-800-457-3911 (Canada)
All manuals and user guides at all-guides.com
Troubleshooting
• The beep may be difficult to hear in a noisy
environment.
• Install Test Light as explained in the "Test Light
Instructions" section, and use it to determine
the location of Boundary Zone.
• Check that the Transmitter is set up according
to directions and install a new battery within 5
feet of the Transmitter.
• Check that the Transmitter is plugged into a
working outlet, turned on, the Power Light is
on, and the Transmitter controls are set at your
desired settings.
• Check Receiver battery to make sure it is
installed properly.
• When replacing the battery, do so within 5 feet
of the Transmitter.
• Check that the Transmitter is plugged into a
working outlet, turned on, the Power Light is
on, and the Transmitter controls are set at your
desired settings.
• Bring Receiver Collar within 5 feet of the
Transmitter to reset.
Publicité
